6xxx Series 6082 Aluminum Alloy Sheet 5x10 Aluminum Sheet
| Attribute | Value |
| Type | Aluminum plate |
| Standard | ASTM B209/AMS 4152 |
| Alloy | 6082 |
| Temper | t6 / t651 / h112/ O |
| Thickness | 6.0-260mm |
| Trade terms | FOB,CIF,CNF, EXW |
Premium Structural Aluminum Alloy
As a premium structural alloy in EN 573-3 standards, 6082 combines optimal strength, workability and cost-efficiency for demanding engineering applications. Its balanced properties make it particularly dominant in European transportation and industrial sectors.
Our Company Advantages
- Standardized processes enhance work efficiency, reduce errors, and boost productivity
- Optimized work environment fosters positive attitudes and team cohesion
Technological & Production Strengths
- National-level corporate technology center with industry standard contributions
- Annual capacity exceeding 1 million tons of aluminum
- Certified production for automotive, railway, marine, and aerospace applications
Advanced Production Equipment
| Code | Name | Brand |
| A | Aluminum ingot melting furnace | GAUTSCHI (Switzerland) |
| B | 4 continuous hot rolling mills | SMS Group (Germany) |
| C | 2800mm width single stand cold rolling mill | SMS Group (Germany) |
| D | All automatic three-dimensional elevated warehouse | Dematic (USA) |
Our Samples
Specializing in medium and thick 5xxx/6xxx series aluminum plates, we produce samples for automotive and railway transportation applications.
Ocean Shipping
For oversize plates, we use Flat Rack Container shipping with secure packaging:
- Secure fastening with wooden blocks, steel straps, and ratchet tie-downs
- Waterproof tarps protect against seawater and rain exposure
- Careful loading with low, evenly distributed center of gravity
Key Properties
Composition
Al-Mg-Si alloy with Mg (0.6-1.2%), Si (0.7-1.3%), and Mn/Cr for enhanced strength
Mechanical Properties
- Tensile strength: ≥310 MPa (T6), ≥260 MPa (T4)
- Elongation: ≥10% (T6), ≥14% (T4)
- Hardness: ~95 HB (T6)
Material Characteristics
- Responds well to T4 (solution) and T6 (solution+aging) heat treatments
- Moderate corrosion resistance - requires surface protection for harsh environments
- Good weldability with post-weld heat treatment to restore strength
Common Tempers
| Temper | Treatment | Characteristics |
| T4 | Solution treated + naturally aged | High formability |
| T6 | Solution + artificially aged | Peak strength |
| O | Annealed | Maximum softness |
Key Advantages
- High strength-to-weight ratio (60% lighter than steel)
- Excellent machinability and surface finish quality
- Cost-effective alternative to 7xxx series
Typical Thicknesses
- Transportation: 2-10 mm
- Machinery: 5-50 mm
- Construction: 1-6 mm
- Electronics: 0.5-3 mm
Main Applications
- Transportation: Rail car structures, truck frames
- Industrial: Hydraulic systems, robotic frames
- Construction: Load-bearing trusses, bridges
- Aerospace: Drone components
Comparison with Similar Alloys
| Property | 6082 | 6061 | 7075 |
| Strength | High | Medium | Very High |
| Corrosion | Moderate | Moderate | Poor |
| Machinability | Excellent | Excellent | Good |
| Cost | Mid-range | Low | High |
